Frequently Asked Questions
- What are toxic molds?
- Why sample for mold?
- How many samples are enough?
- What kind of samples are taken?
- What are regulations and protocols for sampling indoor air for mold?
- What is stachybotrys?
- Is stachybotrys dangerous?
What are toxic molds?
Toxic molds such as stachybotrys, and aspergillus niger,can cause indoor air quality
problems leading to allergies and sickness. Many times these problems are a result of
airborne mycotoxins and mold spores. Toxic mold has become a huge problem for homeowners
and insurance companies. One of the best ways to find out if your home has toxic mold or
black mold is to have it inspected. of results and solutions. LA Mold Inspection was created
to help provide toxic mold information, solutions, news, and help.
back to top
Why sample for mold?
The goal of biological sampling is to help determine whether the biological particles
present in a particular environment are affecting or causing irritation in certain
individuals. Sampling is also used to locate the sources of indoor microorganisms and
facilitate an effective remediation. While we are typically surrounded by a wide variety
of different microorganisms every day, sampling provides us with a method to establish in
a scientific way whether the environment in question contains more organisms than would
normally be present. There are numerous techniques that may be used to evaluate the level
of indoor microorganisms. We believe, however, that scientific comparisons are only possible
when measured volumes of air are sampled and when results of surveys are expressed in terms
of volumetric measurements.
back to top
How many samples are enough?
Usually at least 3 or more samples are collected by the inspector to provide the baseline
and accurate information as to indoor levels. LA Mold Inspection does not charge for
individual samples collected and analyzed. This is included in our standard inspection
fee. Be careful of other inspectors who will quote a very low inspection fee, then will
charge you for a large number of samples, raising your cost by several thousand dollars.
back to top
What kind of samples are taken?
Some inspectors claim to be able to “visually” inspect for mold without taking
any samples for analysis. This isn’t valid because mold can frequently be thriving
in places you can’t see: behind the dishwasher, in the attic, in the crawl space
under the house, in the wall behind a leaky toilet etc. A professional inspector will
always take samples in order to obtain an accurate picture of actual mold levels. The most
important sample will be an air sample taken outdoors to establish a baseline or normal
level of mold. This baseline sample will be compared to the samples taken indoors. If
indoor levels and types of molds are less than outdoor levels, then the indoor levels are
generally considered “safe.”
back to top
What are regulations and protocols for sampling indoor air for mold?
Currently, there are no widely accepted protocols or regulations regarding biological air
sampling. In the absence of standards, we believe that common sense should prevail. We
know that some bacteria and fungal spores can cause disease only when they are alive
(viable), while others are capable of producing allergies or irritation even when no longer
living. Also, while cultures may permit greater accuracy in speciating some fungal organisms
present, spores vary widely in their ability to grow and compete on laboratory media. This
may result in an inaccurate characterization of the area sampled. Therefore, a complete
sampling protocol for the biological flora in any environment uses both a culturable and
non-culturable sampling method. There are times when this is not possible due to time and
budget constraints. In these cases, we currently believe that a non-culturable spore trap
sample provides a more accurate "snapshot" of the air and is usually the best
choice when only one sampling method can be used.
back to top
What is stachybotrys?
Stachybotrys Chartarum is a greenish-black fungus that is found throughout the world and is
typically wet and slimy to the touch. There are somewhere in the neighborhood of 15
different species that grow in surroundings where the humidity exceeds 50%. Stachybotrys
Chartarum thrives on materials high in cellulose and low in nitrogen content. Examples
include wet leaves, straw, carpet, wallpaper, thermal insulation, fiberboard, dry wall,
gypsum board, paper, dust, and hay. What these examples have in common is their propensity
to become chronically moist or water logged due to excessive humidity, water leaks,
flooding, etc. It is not found on materials such as plastic, vinyl, or ceramic tiles, nor
is it the green mold in bread or between shower tiles. Since homes and buildings are not
typically tested for it, it is difficult to say how prevalent this mold is.
back to top
Is stachybotrys dangerous?
Stachybotrys chartarum is dangerous to humans because it can, given the proper environmental
conditions, create multiple toxic chemicals called mycotoxins. These toxic byproducts exist
in the spores of the mold, as well as in the tiny fragments that can become airborne.
Luckily, these spores and fragments are often unable to become airborne because they are
part of the slimy mold cluster. However, once the mold dries up, there is a much greater
possibility that the spores or fragments can become airborne and come into contact with
humans. Of particular concern is the threat that humans will inhale and ingest these toxic
spores.
back to top
